Here is the waterproof carport installation manual:
1.Preparation
1.1 Safety
In order to ensure the safety, following tools are used : Goggles; Helmet;Gloves; Safety Clothing; Safety Shoes.
1.2 Components
Rail; Rail Splice; End Clamp; Middle Clamp; Beam; Rail clamp; Water Channel;
1.3 Tools
Allen wrench; M8-M12 Wrench;M8-M12 Electric Rotor; M8-M12 Twist Wrench; Tape Measure Rope; Electric Screw Machine; Wood Hammer; Awning Turned.
2. Construction
Step 1: Make the concrete and punch the bolts in a pre-reserved position. Make sure the front and rear row of C-channel are in a line and at the same height.
Step 2: Install pillar and beam,and connect pillar with beam through U shape connector.
Step 3：Install waterproof rails
A. Connect waterproof rails by rail splices to the required length of each array and fix them by ST6.3x2 bolts.
Notice: The interior of the connector and the connection of the waterproof rail should be coated with waterproof glue to prevent water leakage.
B..Place the waterproof rails above the beam and use the rail clamp to fix the waterproof rails.
C. Note: Each waterproof rail should be aligned.
Step 4：Install water tunnel and water pipe to get the water out.
Step 5：Module installation.
Lock panels
Fix panels which are closed to the end of rail by end clamps, the other side by middle clamps.
Step 6: Complete the installation
M-F 9AM to 6PM 
info@cowellxm.com
326, No.580 Jiahe Road, Huli District, Xiamen City，Fujian Province, China.
